Description
- 32-bit DSP digital control mode
- Low vibration, low noise, low power consumption
- Maximum output current 3A/phase
- Adopting CAN bus and supporting standard CANopen communication protocol, it can load up to 127 devices
- Supports three modes: protocol position control, speed control, and periodic position control
- Current setting, subdivision, motor start stop control, and real-time monitoring of motor operation can be achieved through the bus
- 2-channel optoelectronic isolation programmable input interface
medical equipment, various types of robots, robotic arms, automated production lines, and various CNC machine tools.
In the formula, a is the design acceleration/deceleration value: s is the current actual position value of the elevator: V2 is the maximum speed of the elevator at this position.Considering that the lifting system needs to enter the parking track at a low crawling speed when entering the end of the stroke to avoid equipment damage caused by large mechanical impact, therefore, when there are still 1~5m away from the parking position, the lifting speed is limited to 0.5m/ below s.Since the instantaneous speed before parking is very low, the position accuracy of the system”s parking can be relatively improved, which is particularly important when the auxiliary shaft is lifted.2.2 Design and implementation of security protection functionsMines have particularly strict requirements on safety and reliability of hoist control systems [5]. While ensuring high reliability of electrical control equipment, the control system also sets up multiple protections in key links where failures may occur, and detects the actions and feedback signals of these protection devices in real time.First of all, monitoring the operating status of the elevator is the top priority in the safety protection function of the elevator control system. In the control system, the operating speed and position of the motor are monitored at all times, and the current position and speed values are compared with the system”s designed speed and position curve. Once it is found that the actual operating speed of the hoist exceeds the designed speed value, immediately Issue an emergency stop command and strictly ensure that the lifting speed is within the safe monitoring range during the entire lifting process. At the same time, position detection switches are arranged at several locations in the wellbore, and these position detection switches correspond to specific position values and corresponding speed values. When the elevator passes these switches, if it is found through encoder detection that the actual speed value and position deviate from the values corresponding to the position detection switch, the control system will also judge that it is in a fault state and immediately implement an emergency stop.In order to determine whether the encoder connected to the main shaft of the elevator drum is normal, two other encoders are installed on the elevator. In this way, the position and speed detection values of the three encoders are always compared. Once it is found that the deviation between the detection value of one encoder and the detection value of the other two encoders exceeds the allowable range, the control system will immediately consider it to have entered a fault state and implement an emergency stop. Protective action.3 ConclusionThe efficient and safe operation of main well equipment is an important guarantee for its function. In the application of mine hoist, the 800xA system designed speed curve, self-correction, various self-diagnosis and protection functions according to the specific process characteristics of the main shaft mine hoist, which has achieved good results in practical applications.
MC2-442-57CQB-1-1H-2 EATON Touch Panel
MC2-440-12TSB-1-1D Capacitive touch screen and resistive touch screen
XV-102-B6-35TQR-10-PLC EATON HMI Human Machine Interface
XV-152-D8-84TVRC-10 Eaton human-machine touch screen
XN-GWBR-CANOPEN EATON HMI Human Machine Interface
XN-GWBR-DNET Intelligent operation control system
XN-QV/8 Eaton human-machine touch screen
XV-102-B5-35TQR-10 EATON Touch Panel
MS2-440-10MPI-1-10 Capacitive touch screen and resistive touch screen
XNE-16DO-24VDC-0.5A-P Intelligent operation control system
XV-440-12TSB-1-50 Capacitive touch screen and resistive touch screen
XN-QV/7 Eaton human-machine touch screen
XN-GW-CANOPEN Eaton human-machine touch screen
XV-442-57CQB-1-1ABVAR03 EATON Touch Panel
XVC-601-GTI-15-DPS-V1-000 Eaton human-machine touch screen
XVS-430-10MPI-1-10 Intelligent operation control system
MC2-440-10TVB-1-20 Intelligent operation control system
STARTERKIT-XV100-PLC-CAN-RS232 Eaton human-machine touch screen
XVC-101-C192K-K82 Eaton human-machine touch screen
XNE-4AO-U/I Capacitive touch screen and resistive touch screen
XT-BCB-TP-EPROM-DNET EATON Touch Panel
XVC-601-GTI-15-DPS-V1-000 EATON HMI Human Machine Interface
XP-702-D0-BOX-10 Eaton human-machine touch screen
XV-440-10TVB-1-1AB Capacitive touch screen and resistive touch screen
XVC-101-C192K-K82-002 EATON Touch Panel
XV-363-57-C00-A00-1B EATON Touch Panel
XV-DVI-GTR-06-000 Capacitive touch screen and resistive touch screen
XV-460-15TXB-1-20 Capacitive touch screen and resistive touch screen
XV-442-57CQB-1-1Q Human Machine Interaction
XN-S4S-SBCS Human Machine Interaction
XN-KO/14 EATON Touch Panel
MC2-442-57CQB-1-21 Human Machine Interaction
XP-702-C0-84TSI-10 EATON Touch Panel
XV-303-70-C00-A00-1C Capacitive touch screen and resistive touch screen
XN-P4T-SBBC-B Human Machine Interaction
XN-S6T-SBBSBB Human Machine Interaction
XVS-440-57MPI-1-1A0 Capacitive touch screen and resistive touch screen
XN-32DI-24VDC-P EATON HMI Human Machine Interface
XNE-GWBR-ETH-SL Capacitive touch screen and resistive touch screen
XVH-330-57MPI-1-10 Eaton human-machine touch screen
XV-102-H4-70TWRL-10 EATON HMI Human Machine Interface
XV-430-12TSB-1-10 Human Machine Interaction
OS-FLASH-A2Q-S Eaton human-machine touch screen
XP-702-C0-15TXI-10 Intelligent operation control system
SCH-1-WINBLOC EATON Touch Panel
