Description
- 32-bit DSP digital control mode
- Low vibration, low noise, low power consumption
- Maximum output current 3A/phase
- Adopting CAN bus and supporting standard CANopen communication protocol, it can load up to 127 devices
- Supports three modes: protocol position control, speed control, and periodic position control
- Current setting, subdivision, motor start stop control, and real-time monitoring of motor operation can be achieved through the bus
- 2-channel optoelectronic isolation programmable input interface
medical equipment, various types of robots, robotic arms, automated production lines, and various CNC machine tools.
user experience Secondly, if power system engineers are to consider the convenience and speed of using the product in the future, operability needs to be improved while ensuring stability. This requires a simple self-service system and an operation interface with good visual effects that can meet the needs of users. Some operating habits and other aspects * cut costs Furthermore, since there are many nodes in the power system, the same product needs to be deployed on many nodes. Then when the quantity of required products increases, cost issues will inevitably be involved. How to solve the research and development, construction and installation of products and better reduce operating expenses is also a major issue that ABB needs to consider.Implementation of communication between Omron vision system and ABB industrial robotintroductionIn modern production processes, vision systems are often used to measure and identify products, and then the results are transmitted to industrial robots for work through communications . In this process, communication settings are very important. This article analyzes the communication implementation process between the Omron FH-L550 vision system and ABB industrial robots. The main task is to enable the vision system to provide data detection results for ABB industrial robots, and the industrial robots perform related operations based on the data results. This article mainly discusses the entire process of visual system communication transmission implementation.1Ethernet-based communication settings in vision softwareThe main communication methods of Omron FH-L550 vision system controller are as follows [2], namely: parallel communication, PLCLINK communication, Ethernet communication, EtherCAT communication, and protocol-free communication. These five communication methods have their own characteristics in the communication process. In modern equipment, Ethernet communication (Ethernet communication) is the most common, so this article uses the Ethernet communication method as an example to analyze and explain.First, select the “Tools” option in the main interface, select the “System Settings” menu (Figure 1), after entering the “System Settings” menu, click the “Startup Settings” option, and select the “Communication Module” tab (Figure 2 ), after completing the above settings, return to the main interface to save the settings (Figure 3). Finally, select the function menu to perform system restart settings, and wait for the system to complete the restart before proceeding to the next step.After the system restarts, click the “System Settings” menu again and select the “Ethernet (No Protocol (UDP))” option (Figure 4). In this option, there will be parameter settings such as IP address and port. What needs to be noted here are the two IP address parameters. The parameters in “Address Setting 2” need to be filled in. The information that needs to be filled in includes the IP address of the vision controller, subnet mask, default gateway and DNS server.In the port number setting of “Input/Output Settings” at the bottom of the menu, set the port number for data input with the sensor controller. Note that the port number should be the same as the host side, and finally complete the settings and corresponding data saving work.2ABB industrial robot communication settingsFirst, configure the WAN port IP address for the ABB industrial robot. Select the control panel in the teach pendant, then select configuration, then select communication in the theme, click IPSetting, set the IP information and click “Change” to save the IP information.Next, use the SocketCreate robot command to create a new socket using the streaming protocol TCP/IP and assign it to the corresponding variable (Figure 5). Then use the SocketConnect command to connect the socket to the remote computer. After the communication connection is completed, it is necessary to send and receive information from the visual system. To send information, use the SocketSend instruction to send data instructions to the remote computer. After the vision system collects information and makes judgments, the industrial robot system will receive data from the remote computer. The data reception is completed using the SocketReceive instruction. This instruction stores the data in the corresponding string variable while receiving the data. Useful information needs to be extracted from the received data information, which requires StrPart to find the specified character position instruction, extract the data at the specified position from the string, and assign the result to a new string variable. Finally, when the socket connection is not in use, use SocketCloSe to close it.
XVS-440-10MPI-1-1AFVAR12 139969 eaton touchscreen
XN-GWBR-MODBUS-TCP Industrial Control Panel eaton
XN-2DO-24VDC-0.5A-P Touch Screen Glass for HMI
XV-102-B4-35TQR-10 Micro Innovation touch
XNE-GWBR-2ETH-IP Industrial Control Panel eaton
XV-102-D0-57TVR-10 Micro Innovation touch
MPB2-TP Micro Innovation touch
XV-102-A3-35MQR-10 EATON ELECTRIC Touch panel
XT-MEM-CF128M-02 Micro Innovation touch
XV-230-57MPN-1-10-PLC Micro Innovation touch
XVS-440-10MPI-1-10 EATON ELECTRIC Touch panel
XV-152-D8-84TVR-10 Touch Screen Glass for HMI
XV-442-57CQB-1-50 139969 eaton touchscreen
XN-2AO-U(-10/0…+10VDC) EATON ELECTRIC Touch panel
MC2-440-10TVB-1-1D Touch Screen Glass for HMI
XV-442-57CQB-1-50 Touch Screen Glass for HMI
XNE-4AO-U/I EATON ELECTRIC Touch panel
MC2-440-10TVB-1-10 Eaton Display Screen
MV4-690-TA3-XX3 Industrial Control Panel eaton
XV-440-10TVB-1-20 Eaton Display Screen
XN-KO/17 EATON ELECTRIC Touch panel
XNE-GWBR-PBDP Micro Innovation touch
XV-303-10-CE0-A00-1C 139969 eaton touchscreen
XV-440-10TVB-1-30 Industrial Control Panel eaton
xV-252-57CNN-1-10 Industrial Control Panel eaton
XV-102-D6-57TVRC-10 Touch Screen Glass for HMI
XV-303-10-B00-A00-1B Industrial Control Panel eaton
XC-CPU202-EC4M-8DI-6D0-XV EATON ELECTRIC Touch panel
XN-ANBZ-BR Touch Screen Glass for HMI
XVH-330-57BAS-1-10 Industrial Control Panel eaton
XVC-601-GTI-10-DPS-V1-000 EATON ELECTRIC Touch panel
XV-440-10TVB-1-10 Industrial Control Panel eaton
OS-FLASH-A1-L EATON ELECTRIC Touch panel
STARTERKITXV-200COLORHMIDP Touch Screen Glass for HMI
XV-102-B3-35MQR-10-PLC 139969 eaton touchscreen
SCH-1-WINBLOC Industrial Control Panel eaton
XV-102-D4-57TVR-10 EATON ELECTRIC Touch panel
XVM-450-65TVB-1-11 Eaton Display Screen
XP-702-C0-BOX-10 Industrial Control Panel eaton
STARTERKIT-XV100-PLC-MPI-DPM-RS485 Eaton Display Screen
XV-102-D6-70TWRC-10 EATON ELECTRIC Touch panel
XP-503-15-A10-A00-1B Micro Innovation touch
OS-FLASH-A3-X EATON ELECTRIC Touch panel
xvs-440-10mpi-1-1u Eaton Display Screen
XN-S6S-SBCSBC 139969 eaton touchscreen
