Description
DS200GSIAG1CGD Product Introduction
The specific application scope of the product
will depend on the needs of system integration and industrial application, but generally speaking, this type of embedded controller module can be applied to the following categories:
manufacturing processes, etc.
monitoring and control system.
of the controller module, as well as the specific needs of the customer.
designed to manage gas or steam turbines.
It has a CIMPLICITY graphical interface and an HMI with software suitable for running heavy-duty turbines.
be installed at the bottom of the cabinet. For a small setup that is easy to serve a triple redundant system, up to three components can be installed side by side.
he board can operate within a temperature range of 0 to 65 degrees Celsius without the need for a fan for cooling. NFPA Class 1. This board can be used for two applications.
user experience Secondly, if power system engineers are to consider the convenience and speed of using the product in the future, operability needs to be improved while ensuring stability. This requires a simple self-service system and an operation interface with good visual effects that can meet the needs of users. Some operating habits and other aspects * cut costs Furthermore, since there are many nodes in the power system, the same product needs to be deployed on many nodes. Then when the quantity of required products increases, cost issues will inevitably be involved. How to solve the research and development, construction and installation of products and better reduce operating expenses is also a major issue that ABB needs to consider.Implementation of communication between Omron vision system and ABB industrial robotintroductionIn modern production processes, vision systems are often used to measure and identify products, and then the results are transmitted to industrial robots for work through communications . In this process, communication settings are very important. This article analyzes the communication implementation process between the Omron FH-L550 vision system and ABB industrial robots. The main task is to enable the vision system to provide data detection results for ABB industrial robots, and the industrial robots perform related operations based on the data results. This article mainly discusses the entire process of visual system communication transmission implementation.1Ethernet-based communication settings in vision softwareThe main communication methods of Omron FH-L550 vision system controller are as follows [2], namely: parallel communication, PLCLINK communication, Ethernet communication, EtherCAT communication, and protocol-free communication. These five communication methods have their own characteristics in the communication process. In modern equipment, Ethernet communication (Ethernet communication) is the most common, so this article uses the Ethernet communication method as an example to analyze and explain.First, select the “Tools” option in the main interface, select the “System Settings” menu (Figure 1), after entering the “System Settings” menu, click the “Startup Settings” option, and select the “Communication Module” tab (Figure 2 ), after completing the above settings, return to the main interface to save the settings (Figure 3). Finally, select the function menu to perform system restart settings, and wait for the system to complete the restart before proceeding to the next step.After the system restarts, click the “System Settings” menu again and select the “Ethernet (No Protocol (UDP))” option (Figure 4). In this option, there will be parameter settings such as IP address and port. What needs to be noted here are the two IP address parameters. The parameters in “Address Setting 2” need to be filled in. The information that needs to be filled in includes the IP address of the vision controller, subnet mask, default gateway and DNS server.In the port number setting of “Input/Output Settings” at the bottom of the menu, set the port number for data input with the sensor controller. Note that the port number should be the same as the host side, and finally complete the settings and corresponding data saving work.2ABB industrial robot communication settingsFirst, configure the WAN port IP address for the ABB industrial robot. Select the control panel in the teach pendant, then select configuration, then select communication in the theme, click IPSetting, set the IP information and click “Change” to save the IP information.Next, use the SocketCreate robot command to create a new socket using the streaming protocol TCP/IP and assign it to the corresponding variable (Figure 5). Then use the SocketConnect command to connect the socket to the remote computer. After the communication connection is completed, it is necessary to send and receive information from the visual system. To send information, use the SocketSend instruction to send data instructions to the remote computer. After the vision system collects information and makes judgments, the industrial robot system will receive data from the remote computer. The data reception is completed using the SocketReceive instruction. This instruction stores the data in the corresponding string variable while receiving the data. Useful information needs to be extracted from the received data information, which requires StrPart to find the specified character position instruction, extract the data at the specified position from the string, and assign the result to a new string variable. Finally, when the socket connection is not in use, use SocketCloSe to close it.
IS200TTURH1B Processor/Controller Mark VI System
IS200ACLEH1ABA From General Electric in the United States
IS220UCSH1A Processor/Controller Mark VI System
DS200DSPCH1ADA Processor/Controller Mark VI System
IS215VCMIH1B From General Electric in the United States
IS210BPPBH2CAA GE power control board
DS200PTBAG1BAA Processor/Controller Mark VI System
IS200TREGH1B From General Electric in the United States
IS200EGDMH1A GE power control board
IS200VAOCH1B Processor/Controller Mark VI System
IS215UCVEH2A GE power control board
IS410JPDSG1A Processor/Controller Mark VI System
IS200EISBH1A Processor/Controller Mark VI System
IS200EDEXG1A I/O excitation redundant module GE
IS200STCIH4A I/O excitation redundant module GE
DS200SDCIG2A Processor/Controller Mark VI System
IS200WNPSH1ABA From General Electric in the United States
IS210DTRTH1A From General Electric in the United States
IS200TTURH1CFD High performance processor module GE
IS215UCVEM06A I/O excitation redundant module GE
DS200QTBAG1ADC From General Electric in the United States
IS200IGDMH1AAA High performance processor module GE
IS420PPDAH1B Processor/Controller Mark VI System
IS215PMVPH1A High performance processor module GE
DS200TCEBG1A High performance processor module GE
DS200DACAG1ACD High performance processor module GE
DS200KLDBG1A Gas turbine system Mark VI
IS200ERRBG1A Gas turbine system Mark VI
DS200GDPAG1A Gas turbine system Mark VI
IS420ESWAH4A From General Electric in the United States
IS210MVRAH2A I/O excitation redundant module GE
IS200TBTCH1B Gas turbine system Mark VI
IS210DRTH1AA Processor/Controller Mark VI System
IS200STAIH2A I/O excitation redundant module GE
IS2020RKPSG2A Gas turbine system Mark VI
IS215PMVPH1A Gas turbine system Mark VI
IS200ESYSH1AAA Gas turbine system Mark VI
DS200PTCTG2BAA From General Electric in the United States
IS200TSVOH1BCC GE power control board
DS200SDCCG4AGD High performance processor module GE
IS200TVIBH2BBB From General Electric in the United States
IS200ECTBG2A From General Electric in the United States
IS220PAOCH1A Processor/Controller Mark VI System
IS215UCVEM09A GE power control board
IS200AVGBG1AAA From General Electric in the United States
IS215WETAH1BB From General Electric in the United States
IS200BPIIH1AAA Gas turbine system Mark VI
IS200DAMDG1A Processor/Controller Mark VI System
IS420UCPAH1A I/O excitation redundant module GE
DS200TCDAG1BDB I/O excitation redundant module GE
DS200PCCAG7ACB I/O excitation redundant module GE
IS220PSCAH1B Gas turbine system Mark VI
IS230PTURHIA High performance processor module GE
DS200TCQAG1B From General Electric in the United States
IS200TBTCH1B From General Electric in the United States
IS220YDOAS1AJ I/O excitation redundant module GE
IS200ISBDG1A From General Electric in the United States
IS200SSCAH2A Gas turbine system Mark VI
IS200JPDMG1A GE power control board
IS210MACCH1AKH GE power control board
IS215UCVEH2AF High performance processor module GE
IS200ERSCG1A High performance processor module GE
DS200LDCFBG1BNC High performance processor module GE
DS200PLIBG2ACA I/O excitation redundant module GE
IS420ESWBH1A Processor/Controller Mark VI System
IS420YVIBS1B High performance processor module GE
IS200DTCIH1A GE power control board
IS200EPBPG1ACD From General Electric in the United States
IS220PTURH1B GE power control board
IS200RAPAG1BBA From General Electric in the United States
DS200TCRAG1ACC Gas turbine system Mark VI
DS200VPBLG1ADD GE power control board
DS200DSPCH1ADA I/O excitation redundant module GE
DS215TCQAG1BZZ01A Processor/Controller Mark VI System
IS200EISBH1A From General Electric in the United States
IS200DSPXH2B Processor/Controller Mark VI System
DS200TCPDG1BEC Gas turbine system Mark VI
IS210BAPAH1A I/O excitation redundant module GE
IS230STTCH2A High performance processor module GE
IS215UCVDH2AM Processor/Controller Mark VI System
IS2020RKPSG2A From General Electric in the United States
IS220PTCCH1A I/O excitation redundant module GE
