Description
5466-340 From Woodward, USA
Non differential regulation is mainly used for constant speed control and is suitable for single machine operation or multiple prime movers working together in an isolated power grid. Differential regulation provides more control flexibility.
further enhancing its performance and application range.
rich additional functions, and high-precision output signals. Whether it is in the fields of generator sets, compressors, pump stations, or ships and locomotives, it can effectively ensure the stable operation of equipment within the set range.
power measurement level 1, editable screen, multi interface toolkit connection, etc. All details can be found in Woodward easyYgen manual 37582A
The rated operating temperature range of this model is -20 to 70 ° C; the rated temperature range of the LT model is -40 to 70 ° C, suitable for outdoor use.
5466-340 is equipped with a monitor (not available on the 3100 model) and is designed for front panel installation.
The built-in HMI has a color LCD and soft keys (now with dedicated buttons) for direct control of the 5466-340 device. Multi level password protection can prevent unauthorized changes.
The generator set has four operating modes and the option to configure a manual circuit breaker control device.
How to use 5466-340？
What is 5466-340 used for?
5466-340 Customs Code
3.2 Upgrading of regulators and control systemsFor the upgrade of the regulator, the original excitation control system cabinet structure is retained, and the entire system is upgraded by upgrading the board card. Among them, the CoB main board, MUB measurement board, F10 input and output board, and LCP local control panel were replaced with the PEC800 controller, CCM measurement control interface board, CIo comprehensive input and output board, and ECT excitation system control terminal in the Unitrol6800 system respectively.For the upgrade of the power cabinet, since the power of the excitation system will not change during the transformation, the N-1 redundant configuration of the five UNL3300 rectifier bridges in the original system has not been changed, but the control and measurement parts of the rectifier bridge have been upgraded. And the fan circuit and power control part of the rectifier bridge have been upgraded. Among them, the signal interface board (PsI) was changed to the rectifier bridge signal interface board (CsI), the circuit breaker of the rectifier bridge panel was changed from CDP to CCP, and the rectifier bridge control interface board (CIN) was changed to the rectifier bridge control board (CCI).For the upgrade of the demagnetization cabinet, the switch control part was mainly upgraded. By adding a CIo board to the switch cabinet and installing a special power distributor and relay to control the demagnetization switch, the original PsI board was removed. Secondly, in the transformation of the current detection part, the Hall element in the Unitrol5000 system was replaced by the current relay of the Unitrol6800 system.For the upgrade of the excitation current measurement part, the rectifier side Hall element of the rectifier bridge was replaced with an AC side CT. Relying on the linearity of the CT, the current sharing coefficient of the excitation system was increased to 0.98, so that the role of the rectifier bridge can be fully exerted in the system. . For the upgrade of the fan power supply circuit of the rectifier cabinet, each power cabinet can independently control the power supply of the fans in the cabinet to avoid the problem that if the power circuit relay fails in the original system, all the fans will not work.3.3Unitrol6800 functional logic configuration pointsThe Unitrol6800 system adds PT slow-blow judgment logic, and defines the actions of PT slow-blow as alarm and channel switching. The system PT slow-blow logic pressure difference is 2% to ensure sufficient sensitivity. Since some external reasons will cause the sequential increase or decrease of magnetic commands, a special increase or decrease magnetic contact adhesion judgment logic has been added to effectively lock out external causes. At the same time, it can avoid the jitter of the relay on the increase or decrease magnetic circuit and ensure the stability of the circuit. The excitation temperature detection is used to alarm in the system, but it cannot control the system tripping. The tripping intermediate relays K291 and K292 use high-power (≥5w) relays to avoid the problem of tripping of the excitation system due to signal interference.4 Problems discovered during the transformation and their solutionsAfter upgrading the excitation system from Unitrol5000 to Unitrol6800, since the partition between the regulator cabinets of the original excitation switch cabinet was removed and the mounting backplate of the regulator was moved forward, the hot air from the excitation switch cabinet will enter the excitation regulator cabinet, causing the cabinet to be damaged. The internal temperature rises, and sometimes the temperature can even reach 45°C. In order to avoid problems caused by high temperatures, partitions were added to reduce the temperature inside the switch cabinet and control the temperature to 30°C.During the maintenance process, if the grounding carbon brush of the generator is removed, it is easy to cause the rotor grounding relay isoLR275 to malfunction. Therefore, during maintenance, the power supply of the grounding relay will be disconnected and the large shaft in the magnetic cabinet will be short-circuited.5 ConclusionThrough the transformation of the excitation system, our company not only meets the needs of increasing the generator capacity, but also eliminates the safety hazards of ARCnet failure or flat cable damage in the excitation system of the unit. It can find the fault point during maintenance and prevent the unit from non-stop. event. The new board used in the new excitation system has modular characteristics, which can make online maintenance more convenient, and because the boards use trigger pulse generation communication and optical fiber redundant communication, the stability of information transmission is ensured. Avoid communication failures and damage to pulse lines.
9905-204 Generator Parts Speed Controller 2301A Speed
3081-847 WOODWARD Speed Sensor Full Series
9905-603 WOODWARD Speed Sensor Full Series
5405-819 Generator Parts Speed Controller 2301A Speed
5464-555 Controller debugger generator WOODWARD
5434-334 WOODWARD Speed Sensor Full Series
8273-276 WOODWARD Speed Sensor Full Series
5464-015 WOODWARD Speed Sensor Full Series
5439-927 Generator Parts Speed Controller 2301A Speed
5415-816 From Woodward, USA
8915-782 From Woodward, USA
5461-656 From Woodward, USA
5464-210 From Woodward, USA
5463-473 C Generator Parts Speed Controller 2301A Speed
9700-1200 From Woodward, USA
5461-780 Controller debugger generator WOODWARD
8250-807 Controller debugger generator WOODWARD
5464-017 Generator Parts Speed Controller 2301A Speed
8270-201 Controller debugger generator WOODWARD
8273-126 From Woodward, USA
5464-024 WOODWARD generator set speed control board
8440-2150 Controller debugger generator WOODWARD
8900-067 WOODWARD Speed Sensor Full Series
5460-796 From Woodward, USA
9905-792 WOODWARD 2301A Speed Control Controller
8440-1750 Generator Parts Speed Controller 2301A Speed
SPM-D11 From Woodward, USA
8234-346A From Woodward, USA
9905-797 Generator Parts Speed Controller 2301A Speed
8440-2256 Controller debugger generator WOODWARD
9905-096 WOODWARD 2301A Speed Control Controller
9907-019 From Woodward, USA
8440-2082 WOODWARD Speed Sensor Full Series
5441-413 WOODWARD Speed Sensor Full Series
5462-966 From Woodward, USA
