Description
1C31194G02 Emerson Ovation Electromagnetic Output
thereby controlling external devices or circuits.
1. Position control
The position control of the motion controller can be divided into point-to-point motion control and continuous trajectory motion control according to the control principle.
Point position control is a point-to-point positioning control that does not control the motion trajectory between points, nor does it perform processing or measurement during this process.
Continuous trajectory control is divided into linear control and contour control. Linear control refers to the linear motion of the controlled object in a certain direction at a certain speed (single axis or multi axis linkage), during which processing or measurement is required; Contour control is the process of controlling the instantaneous position and velocity of two or more coordinate axes to form a contour curve or surface in a plane or space through linkage.
2. Speed control and acceleration control
The motion controller speed control can be used alone or combined with position control to form a dual loop control, but the main loop is position control, and speed control serves as feedback correction to improve the dynamic performance of the system.
3. Synchronous control
Synchronous control of motion controller refers to the synchronous motion control of speed or position of two or more axes, such as system control with electronic gearbox and electronic cam functions. Some require not only simultaneous startup, but also position synchronization, which requires high synchronization accuracy.
responsible for processing signals from on-site sensors or driving actuator actions. For example, they may need to cooperate with devices such
as BANNER travel switch T30UIPB to receive their transmitted position signals; Or by controlling components such as Burkert solenoid valve 00131421, the on/off of fluid media can be precisely managed.
these modules integrate more complex logic processing capabilities. The core task of a pressure switch is to detect whether the pressure
has reached a preset threshold and output a switch signal. Its function is highly specific and fixed. And modules 1C31194G02 and 1
C31219G01 have the ability to comprehensively judge multiple such switch signals and transmitter signals (such as transmitter 1066-P-HT-60),
and output complex control instructions according to internal logic.
