Description
IS200VGENH1B Product Introduction
The specific application scope of the product
will depend on the needs of system integration and industrial application, but generally speaking, this type of embedded controller module can be applied to the following categories:
manufacturing processes, etc.
monitoring and control system.
of the controller module, as well as the specific needs of the customer.
designed to manage gas or steam turbines.
It has a CIMPLICITY graphical interface and an HMI with software suitable for running heavy-duty turbines.
be installed at the bottom of the cabinet. For a small setup that is easy to serve a triple redundant system, up to three components can be installed side by side.
he board can operate within a temperature range of 0 to 65 degrees Celsius without the need for a fan for cooling. NFPA Class 1. This board can be used for two applications.
3.2 Upgrading of regulators and control systemsFor the upgrade of the regulator, the original excitation control system cabinet structure is retained, and the entire system is upgraded by upgrading the board card. Among them, the CoB main board, MUB measurement board, F10 input and output board, and LCP local control panel were replaced with the PEC800 controller, CCM measurement control interface board, CIo comprehensive input and output board, and ECT excitation system control terminal in the Unitrol6800 system respectively.For the upgrade of the power cabinet, since the power of the excitation system will not change during the transformation, the N-1 redundant configuration of the five UNL3300 rectifier bridges in the original system has not been changed, but the control and measurement parts of the rectifier bridge have been upgraded. And the fan circuit and power control part of the rectifier bridge have been upgraded. Among them, the signal interface board (PsI) was changed to the rectifier bridge signal interface board (CsI), the circuit breaker of the rectifier bridge panel was changed from CDP to CCP, and the rectifier bridge control interface board (CIN) was changed to the rectifier bridge control board (CCI).For the upgrade of the demagnetization cabinet, the switch control part was mainly upgraded. By adding a CIo board to the switch cabinet and installing a special power distributor and relay to control the demagnetization switch, the original PsI board was removed. Secondly, in the transformation of the current detection part, the Hall element in the Unitrol5000 system was replaced by the current relay of the Unitrol6800 system.For the upgrade of the excitation current measurement part, the rectifier side Hall element of the rectifier bridge was replaced with an AC side CT. Relying on the linearity of the CT, the current sharing coefficient of the excitation system was increased to 0.98, so that the role of the rectifier bridge can be fully exerted in the system. . For the upgrade of the fan power supply circuit of the rectifier cabinet, each power cabinet can independently control the power supply of the fans in the cabinet to avoid the problem that if the power circuit relay fails in the original system, all the fans will not work.3.3Unitrol6800 functional logic configuration pointsThe Unitrol6800 system adds PT slow-blow judgment logic, and defines the actions of PT slow-blow as alarm and channel switching. The system PT slow-blow logic pressure difference is 2% to ensure sufficient sensitivity. Since some external reasons will cause the sequential increase or decrease of magnetic commands, a special increase or decrease magnetic contact adhesion judgment logic has been added to effectively lock out external causes. At the same time, it can avoid the jitter of the relay on the increase or decrease magnetic circuit and ensure the stability of the circuit. The excitation temperature detection is used to alarm in the system, but it cannot control the system tripping. The tripping intermediate relays K291 and K292 use high-power (≥5w) relays to avoid the problem of tripping of the excitation system due to signal interference.4 Problems discovered during the transformation and their solutionsAfter upgrading the excitation system from Unitrol5000 to Unitrol6800, since the partition between the regulator cabinets of the original excitation switch cabinet was removed and the mounting backplate of the regulator was moved forward, the hot air from the excitation switch cabinet will enter the excitation regulator cabinet, causing the cabinet to be damaged. The internal temperature rises, and sometimes the temperature can even reach 45°C. In order to avoid problems caused by high temperatures, partitions were added to reduce the temperature inside the switch cabinet and control the temperature to 30°C.During the maintenance process, if the grounding carbon brush of the generator is removed, it is easy to cause the rotor grounding relay isoLR275 to malfunction. Therefore, during maintenance, the power supply of the grounding relay will be disconnected and the large shaft in the magnetic cabinet will be short-circuited.5 ConclusionThrough the transformation of the excitation system, our company not only meets the needs of increasing the generator capacity, but also eliminates the safety hazards of ARCnet failure or flat cable damage in the excitation system of the unit. It can find the fault point during maintenance and prevent the unit from non-stop. event. The new board used in the new excitation system has modular characteristics, which can make online maintenance more convenient, and because the boards use trigger pulse generation communication and optical fiber redundant communication, the stability of information transmission is ensured. Avoid communication failures and damage to pulse lines.
IS200VPROH2B Gas turbine system Mark VI
IS200EPSMG1ABB Gas turbine system Mark VI
IS2020ISUCG Gas turbine system Mark VI
IS215VCMIH2BZZ01A GE power control board
IS420PUAAH1AD Gas turbine system Mark VI
DS200QTBAG1ACB Gas turbine system Mark VI
DS3800HRCA1D1B Processor/Controller Mark VI System
IS410STCIS6A Processor/Controller Mark VI System
IS210SCLSH1A High performance processor module GE
IS200DTURH1ABA High performance processor module GE
IS200TRPAS1A Gas turbine system Mark VI
IS420YDOAS1B From General Electric in the United States
DS200DTBDG1 Processor/Controller Mark VI System
IS220PRTDH1A Processor/Controller Mark VI System
IS215PCMIH1A Processor/Controller Mark VI System
IS420ESWAH3A High performance processor module GE
IS210RERCH1RBB High performance processor module GE
DS200TBQBG1ACB I/O excitation redundant module GE
IS220YDOAS1AJ From General Electric in the United States
IS215UCVEH2A High performance processor module GE
DS200DMCBG1AJG From General Electric in the United States
IS200VAICH1C Gas turbine system Mark VI
DS200ADMAH1A Gas turbine system Mark VI
DS200DCFBG1BNC From General Electric in the United States
IS200HFPAG1 From General Electric in the United States
DS200TBCBG1AAA Gas turbine system Mark VI
IS215VCMIH2CA I/O excitation redundant module GE
DS200PLIBG1ACA From General Electric in the United States
IS200EPDMG1B Gas turbine system Mark VI
IS200ECTBG1ADE High performance processor module GE
IS430SNUAH1AC High performance processor module GE
DS200TCDAH1BHD Gas turbine system Mark VI
DS200TBQAG1ABB I/O excitation redundant module GE
IS200TSVOH1BBB High performance processor module GE
IS220PTURH1BF From General Electric in the United States
IS220YDOAS1AJ GE power control board
DS200TCPSG1A Processor/Controller Mark VI System
IS200EPDMG1ABA High performance processor module GE
IS200BPIHH1AAA Processor/Controller Mark VI System
IS215VPROH1B Processor/Controller Mark VI System
DS200PTCTG2BAA High performance processor module GE
IS415UCVGH1A I/O excitation redundant module GE
IS200TBCIH2B GE power control board
DS200TCDAG1B Gas turbine system Mark VI
IS200ICBDH1BAA From General Electric in the United States
IS420YDOAS1B GE power control board
IS200TVIBH2B From General Electric in the United States
IS215UCVEH2AF From General Electric in the United States
IS215PCMIH1A GE power control board
IS210BPPBH2CAA I/O excitation redundant module GE
IS220PPRFH1B From General Electric in the United States
DS200FCGDH1B GE power control board
IS200IVFBG1AAA From General Electric in the United States
IS210DRTDH1A High performance processor module GE
IS220PHRAH1BD Gas turbine system Mark VI
IS200DAMCG1A GE power control board
IS200ECTBG1A GE power control board
IS420ESWAH1A Processor/Controller Mark VI System
DS200TCCBG3BDC Processor/Controller Mark VI System
IS200TDBTH6ABC Processor/Controller Mark VI System
IS200VCRCH1B GE power control board
IS230SNIDH1A From General Electric in the United States
IS200BICRH1A From General Electric in the United States
DS200RTBAG1AHC From General Electric in the United States
IS200DSPXH2DBD Gas turbine system Mark VI
IS410STCIS2A Gas turbine system Mark VI
DS200TBQCG1A I/O excitation redundant module GE
IS200TSVCH2AED I/O excitation redundant module GE
IS200EPDMG1B High performance processor module GE
DS200DCFBG1B Gas turbine system Mark VI
IS200VCRCH1BBB Gas turbine system Mark VI
DS200TCQAG1AFD I/O excitation redundant module GE
DS200ITXDG1ABA High performance processor module GE
IS210AEBIH3BED GE power control board
IS210AEAAH1B Processor/Controller Mark VI System
IS200VTURH2BAC From General Electric in the United States
IS420ESWBH3AX Gas turbine system Mark VI
IS200ERRBG1ABA GE power control board
IS420UCSBH4A From General Electric in the United States
DS215KLDCG1AZZ03A Processor/Controller Mark VI System
IS200PRTDH1A I/O excitation redundant module GE
DS200PTBAG1BAA From General Electric in the United States
IS2020RKPSG2A High performance processor module GE
IS200EGPAG1A I/O excitation redundant module GE
IS200STAOH2AAA From General Electric in the United States
IS200DSVOH1ABA I/O excitation redundant module GE
IS200TBCIH2C I/O excitation redundant module GE
DS200DTBCG1AAA Gas turbine system Mark VI
IS220PDIAH1B From General Electric in the United States
IS210AEDBH4AGD GE power control board
DS200TCEBG1ACE Gas turbine system Mark VI
