Description
DS200IMCPG1CGC Product Introduction
The specific application scope of the product
will depend on the needs of system integration and industrial application, but generally speaking, this type of embedded controller module can be applied to the following categories:
manufacturing processes, etc.
monitoring and control system.
of the controller module, as well as the specific needs of the customer.
designed to manage gas or steam turbines.
It has a CIMPLICITY graphical interface and an HMI with software suitable for running heavy-duty turbines.
be installed at the bottom of the cabinet. For a small setup that is easy to serve a triple redundant system, up to three components can be installed side by side.
he board can operate within a temperature range of 0 to 65 degrees Celsius without the need for a fan for cooling. NFPA Class 1. This board can be used for two applications.
3.2 Upgrading of regulators and control systemsFor the upgrade of the regulator, the original excitation control system cabinet structure is retained, and the entire system is upgraded by upgrading the board card. Among them, the CoB main board, MUB measurement board, F10 input and output board, and LCP local control panel were replaced with the PEC800 controller, CCM measurement control interface board, CIo comprehensive input and output board, and ECT excitation system control terminal in the Unitrol6800 system respectively.For the upgrade of the power cabinet, since the power of the excitation system will not change during the transformation, the N-1 redundant configuration of the five UNL3300 rectifier bridges in the original system has not been changed, but the control and measurement parts of the rectifier bridge have been upgraded. And the fan circuit and power control part of the rectifier bridge have been upgraded. Among them, the signal interface board (PsI) was changed to the rectifier bridge signal interface board (CsI), the circuit breaker of the rectifier bridge panel was changed from CDP to CCP, and the rectifier bridge control interface board (CIN) was changed to the rectifier bridge control board (CCI).For the upgrade of the demagnetization cabinet, the switch control part was mainly upgraded. By adding a CIo board to the switch cabinet and installing a special power distributor and relay to control the demagnetization switch, the original PsI board was removed. Secondly, in the transformation of the current detection part, the Hall element in the Unitrol5000 system was replaced by the current relay of the Unitrol6800 system.For the upgrade of the excitation current measurement part, the rectifier side Hall element of the rectifier bridge was replaced with an AC side CT. Relying on the linearity of the CT, the current sharing coefficient of the excitation system was increased to 0.98, so that the role of the rectifier bridge can be fully exerted in the system. . For the upgrade of the fan power supply circuit of the rectifier cabinet, each power cabinet can independently control the power supply of the fans in the cabinet to avoid the problem that if the power circuit relay fails in the original system, all the fans will not work.3.3Unitrol6800 functional logic configuration pointsThe Unitrol6800 system adds PT slow-blow judgment logic, and defines the actions of PT slow-blow as alarm and channel switching. The system PT slow-blow logic pressure difference is 2% to ensure sufficient sensitivity. Since some external reasons will cause the sequential increase or decrease of magnetic commands, a special increase or decrease magnetic contact adhesion judgment logic has been added to effectively lock out external causes. At the same time, it can avoid the jitter of the relay on the increase or decrease magnetic circuit and ensure the stability of the circuit. The excitation temperature detection is used to alarm in the system, but it cannot control the system tripping. The tripping intermediate relays K291 and K292 use high-power (≥5w) relays to avoid the problem of tripping of the excitation system due to signal interference.4 Problems discovered during the transformation and their solutionsAfter upgrading the excitation system from Unitrol5000 to Unitrol6800, since the partition between the regulator cabinets of the original excitation switch cabinet was removed and the mounting backplate of the regulator was moved forward, the hot air from the excitation switch cabinet will enter the excitation regulator cabinet, causing the cabinet to be damaged. The internal temperature rises, and sometimes the temperature can even reach 45°C. In order to avoid problems caused by high temperatures, partitions were added to reduce the temperature inside the switch cabinet and control the temperature to 30°C.During the maintenance process, if the grounding carbon brush of the generator is removed, it is easy to cause the rotor grounding relay isoLR275 to malfunction. Therefore, during maintenance, the power supply of the grounding relay will be disconnected and the large shaft in the magnetic cabinet will be short-circuited.5 ConclusionThrough the transformation of the excitation system, our company not only meets the needs of increasing the generator capacity, but also eliminates the safety hazards of ARCnet failure or flat cable damage in the excitation system of the unit. It can find the fault point during maintenance and prevent the unit from non-stop. event. The new board used in the new excitation system has modular characteristics, which can make online maintenance more convenient, and because the boards use trigger pulse generation communication and optical fiber redundant communication, the stability of information transmission is ensured. Avoid communication failures and damage to pulse lines.
DS200SDCCG4A GE power control board
IS200EXHSG4A GE power control board
IS200EISBH1AAB GE power control board
8201-HI-IS Processor/Controller Mark VI System
IS200ERGTH1AAA Gas turbine system Mark VI
DS200PTCTG1B GE power control board
DS200TCQAGIBHF GE power control board
DS200TBQCG1AAA From General Electric in the United States
DS200ADPBG1A Gas turbine system Mark VI
DS200UPSAG1A From General Electric in the United States
IS420ESWBH3A GE power control board
DS200SDCIG2AFB Processor/Controller Mark VI System
IS210AEBIH3B Processor/Controller Mark VI System
DS200FHVAG1A I/O excitation redundant module GE
IS420ESWBH34 Gas turbine system Mark VI
IS215ACLEH1B High performance processor module GE
IS200TBAIH1C GE power control board
IS420PUAAH1AD I/O excitation redundant module GE
IS210AEBIH1BED I/O excitation redundant module GE
IS220YDOAS1AJ Processor/Controller Mark VI System
IS215UCVDH1A High performance processor module GE
IS200BPIIH1AA High performance processor module GE
IS200JPDMG1A High performance processor module GE
IS410STCIS2A High performance processor module GE
DS200LDCCH1A From General Electric in the United States
DS200CTBAG1ADD Gas turbine system Mark VI
IS200VAICH1B From General Electric in the United States
IS230SRTDH2A Gas turbine system Mark VI
IS200TBCIH2CAA From General Electric in the United States
DS215TCDAG1BZZ01A High performance processor module GE
IS215ACLEH1C From General Electric in the United States
IS220PAICH2A High performance processor module GE
DS200TCRAG1ACC High performance processor module GE
IS200TBTCH1CBB Gas turbine system Mark VI
IS420YAICS1B From General Electric in the United States
DS200DCFBG1BI Processor/Controller Mark VI System
IS230PCAAH1A From General Electric in the United States
IS200ADIIH1A High performance processor module GE
IS200ERSCG1A Gas turbine system Mark VI
IS220PCLAH1B High performance processor module GE
IS430SNUAH1A I/O excitation redundant module GE
IS200TRPAS1AFD Gas turbine system Mark VI
IS420PUAAH1A GE power control board
DS3800XPEX1B1A From General Electric in the United States
DS200CTBAG1A Gas turbine system Mark VI
IS210AEDBH4AGD Gas turbine system Mark VI
IS215UCVGH1A Gas turbine system Mark VI
IS215UCVEM01A Processor/Controller Mark VI System
IS200TBAIH1B I/O excitation redundant module GE
IS220PPRFH1A High performance processor module GE
IS420YVIBS1B I/O excitation redundant module GE
DS200RTBAG1AHC GE power control board
IS210BPPBH2CAA Processor/Controller Mark VI System
DS200ADPAG1ABB Processor/Controller Mark VI System
IS410TRLYS1B High performance processor module GE
DS200SIOBH1AAA High performance processor module GE
IS2020RKPSG3A GE power control board
IS200TDBTH6ACD I/O excitation redundant module GE
IS200REBFH1ABA Gas turbine system Mark VI
IS230TVBAH2A High performance processor module GE
IS200TBCIH2CAA GE power control board
IS200VCRCH1BBB From General Electric in the United States
DS200FGPAG1A From General Electric in the United States
IS200EPSMG2AE High performance processor module GE
IS210SAMBH2AA Gas turbine system Mark VI
IS215UCVEH2AF Processor/Controller Mark VI System
IS230TDBTH6A Gas turbine system Mark VI
IS200TTURH1BED From General Electric in the United States
DS200TBQCG1AAA I/O excitation redundant module GE
DS200SDCCG4A High performance processor module GE
IS215UCVFH2AB I/O excitation redundant module GE
IS200GGXDG1A From General Electric in the United States
IS200BPIHH1A Processor/Controller Mark VI System
IS420CCGAH2A Gas turbine system Mark VI
IS200SRLYH2A Gas turbine system Mark VI
IS2020LNPSG3A High performance processor module GE
IS200EROCH1ABB GE power control board
IS210AEPSG2BBA GE power control board
DS200TCCBG8BED From General Electric in the United States
IS200TSVCH1A Gas turbine system Mark VI
IS200IGDMH1BBB I/O excitation redundant module GE
DS200ADPAG1A GE power control board
IS420UCPAH2A Gas turbine system Mark VI
IS220PDIAHlA GE power control board
IS200WROGH1A I/O excitation redundant module GE
