Description
5462-521 From Woodward, USA
Non differential regulation is mainly used for constant speed control and is suitable for single machine operation or multiple prime movers working together in an isolated power grid. Differential regulation provides more control flexibility.
further enhancing its performance and application range.
rich additional functions, and high-precision output signals. Whether it is in the fields of generator sets, compressors, pump stations, or ships and locomotives, it can effectively ensure the stable operation of equipment within the set range.
power measurement level 1, editable screen, multi interface toolkit connection, etc. All details can be found in Woodward easyYgen manual 37582A
The rated operating temperature range of this model is -20 to 70 ° C; the rated temperature range of the LT model is -40 to 70 ° C, suitable for outdoor use.
5462-521 is equipped with a monitor (not available on the 3100 model) and is designed for front panel installation.
The built-in HMI has a color LCD and soft keys (now with dedicated buttons) for direct control of the 5462-521 device. Multi level password protection can prevent unauthorized changes.
The generator set has four operating modes and the option to configure a manual circuit breaker control device.
How to use 5462-521？
What is 5462-521 used for?
5462-521 Customs Code
(1) Use STEP7V5.2 configuration software and enter Hardware Configure to complete S7-300 PLC hardware configuration;(2) Select S7-315-2DP as the main station system, import the GSD (device database) file of NPBA-12 into the STEP7 programming environment, and configure the software to configure NPBA-12 with S7-315-2DP as the main station. DP online, and select the PPO type to use. This design uses PPO4 to set the site network address. In the Profibus structure of the variable frequency drive device, ABB frequency converters use the Profibus-DP communication module (NPBA-12) for data transmission, which is mainly periodic: the host reads the input information from the slave station and sends the output information back to the slave station. , so it is necessary to call two system function blocks SFC14 and SFC15 in the PLC main program to read and write these data to achieve communication control to the frequency converter;(3) Create a data block in the main PLC program for data communication with the frequency converter; establish a variable table for observing the real-time communication effect.4 Inverter operation settingsAfter the frequency converter and PLC are connected to a network using Profibus-DP fieldbus, in addition to programming in the PLC automation system, appropriate parameter settings must also be performed on each frequency converter.After the communication cable is connected, start the inverter and complete the setting of the inverter communication parameters.4.1 Basic settings(1) 51.01—Module type, this parameter displays the module model detected by the transmission device. Its parameter value cannot be adjusted by the user. If this parameter is not defined, communication between the module and the drive cannot be established.(2) 51.02—This parameter selects the communication protocol, “0” selects the Profibus-DP communication protocol.(3) 51.03—This parameter is ProfibuThe PPO type selected by s connection, “3” is PPO4, but the PPO type on the inverter should be consistent with the PPO type configured on the PLC.(4) 51.04—This parameter is used to define the device address number, that is, the site address of the frequency converter. Each device on the Profibus connection must have a separate address. In this design, the two frequency converters are stations 2 and 3 respectively. [1]4.2 Connection of process parametersThe process parameter interconnection completes the definition and connection of the corresponding parameters of the NPBA-12 dual-port RAM connector and the frequency converter, including the connection from the master station (PLC) to the frequency converter and the connection from the frequency converter to the master station (PLC). Set the following connection parameters on the frequency converter.(1) PZD value sent from PLC to transmission inverterPZD1—control word, such as start enable, stop, emergency stop and other control commands of the frequency converter;PZD2—frequency setting value of the inverter.(2) PZD value sent from the transmission inverter to the PLCPZD1—status word, such as alarm, fault and other inverter operating status;PZD2—actual speed value, current actual value, etc. of the frequency converter.5 ConclusionAfter the inverter control system adopts the Profibus-DP fieldbus control mode, the entire system not only has strong reliability and is easy to operate, but also can be flexibly modified according to process needs. After this system was applied in Jigang Baode Color Plate Co., Ltd., it has been running well and has provided a successful example for the future automation equipment (network communication of different manufacturers) of the head office.New technology from Swiss ABB Group: Complete car charging in 15 secondsThis technology can charge a car in 15 seconds The Swiss ABB Group has developed a new electric bus technology that can complete vehicle charging in 15 seconds . No other company”s battery technology can achieve this performance.ABB has developed a technology called “Flash Charging” that allows an electric bus with 135 passengers to charge at charging points along the route. The charging point has a charging power of 400 kilowatts and is located above the vehicle. The charging point is connected to a moving arm controlled by a laser and can charge the car battery in 15 seconds. Its minimal design will help protect the urban environment and surrounding landscape.The idea behind this design is to give the electric bus enough power to travel to the next charging station after one charge. The end of the line will allow for long periods of full charging, with the car able to travel longer distances on a full charge. In addition to faster charging times, the system uses a carbon-emission-free solution called TOSA to obtain electricity from clean hydroelectric power stations.ABB initially plans to use this technology between Geneva Airport and the Palexpo International Convention and Exhibition Center. If the test is successful, it will be deployed to public transportation systems. This is more cost effective and environmentally friendly.ABB Executive Chief Technology Officer Claes Rytoft said: “With flash charging, we can trial a new generation of electric buses for large-scale transportation in cities. This project will provide greater flexibility, cost-effectiveness and flexibility.” Paving the way for a lower public transport system while reducing pollution and noise.”
1751-6058B WOODWARD generator set speed control board
9907-164 From Woodward, USA
ART-21819/AIO31 Controller debugger generator WOODWARD
9905-876 WOODWARD 2301A Speed Control Controller
5462-532 WOODWARD Speed Sensor Full Series
8440-1955 Generator Parts Speed Controller 2301A Speed
5464-655 WOODWARD Speed Sensor Full Series
2301E 8273-1011 WOODWARD generator set speed control board
5461-082 WOODWARD Speed Sensor Full Series
5501-371 WOODWARD 2301A Speed Control Controller
5461-622 Controller debugger generator WOODWARD
5463-089 Controller debugger generator WOODWARD
5415-737 WOODWARD 2301A Speed Control Controller
1784-573 Generator Parts Speed Controller 2301A Speed
8256-016 Controller debugger generator WOODWARD
5416-337 Generator Parts Speed Controller 2301A Speed
9907-055 Generator Parts Speed Controller 2301A Speed
8200-1301 WOODWARD generator set speed control board
5464-725 WOODWARD generator set speed control board
5448-906 Controller debugger generator WOODWARD
8273-126 Controller debugger generator WOODWARD
9907-164 Generator Parts Speed Controller 2301A Speed
8200-226 Controller debugger generator WOODWARD
5437-027 Generator Parts Speed Controller 2301A Speed
5463-372 WOODWARD 2301A Speed Control Controller
5461-777 WOODWARD Speed Sensor Full Series
5437-077 Generator Parts Speed Controller 2301A Speed
8230-805 From Woodward, USA
5437-672 WOODWARD 2301A Speed Control Controller
5453-278 WOODWARD Speed Sensor Full Series
5437-417 WOODWARD generator set speed control board
5463-432 Generator Parts Speed Controller 2301A Speed
5463-306 WOODWARD 2301A Speed Control Controller
5437-687 WOODWARD 2301A Speed Control Controller
5500-159C WOODWARD generator set speed control board
5466-258 WOODWARD Speed Sensor Full Series
