Description
5460-796 Controller debugger generator WOODWARD
Non differential regulation is mainly used for constant speed control and is suitable for single machine operation or multiple prime movers working together in an isolated power grid. Differential regulation provides more control flexibility.
further enhancing its performance and application range.
rich additional functions, and high-precision output signals. Whether it is in the fields of generator sets, compressors, pump stations, or ships and locomotives, it can effectively ensure the stable operation of equipment within the set range.
power measurement level 1, editable screen, multi interface toolkit connection, etc. All details can be found in Woodward easyYgen manual 37582A
The rated operating temperature range of this model is -20 to 70 ° C; the rated temperature range of the LT model is -40 to 70 ° C, suitable for outdoor use.
5460-796 is equipped with a monitor (not available on the 3100 model) and is designed for front panel installation.
The built-in HMI has a color LCD and soft keys (now with dedicated buttons) for direct control of the 5460-796 device. Multi level password protection can prevent unauthorized changes.
The generator set has four operating modes and the option to configure a manual circuit breaker control device.
How to use 5460-796？
What is 5460-796 used for?
5460-796 Customs Code
3Configuring Siemens PLCFor PLC, Siemens S-1200PLC is used. Siemens PLC needs to be configured and programmed in Botu software. After the program is completed, the communication settings between the robot and PLC can be set. First, select the device and network in the Porto software, then add a new device and select the controller model as Siemens 1212, as shown in Figure 5. After adding the device, you need to set up the PLC network. The computer and PLC must set corresponding IP addresses in the same network segment to facilitate downloading and uploading PLC programs. After the settings are completed, click on the project tree on the left to select the program block, and then enter program writing. After the entire program is written, you can check whether the robot has received the signal from the PLC through the input and output menu call in the ABB industrial robot teaching pendant, or you can check online whether the PLC has received the signal from the robot through the Botu software. When the line connection is good, the operator can set some signals to complete the test work. If the test communication is normal, further PLC programming can be performed.Figure 5 Botu software configures new equipment4 ConclusionThis article explains in detail the communication setting process between ABB industrial robots and Siemens PLC, making full use of the characteristics of industrial fieldbus technology. During the communication process, signal settings are based on DeviceNet fieldbus technology. The actual operation verifies the content described in this article. feasibility. In communication settings, special attention should be paid to the process of setting parameters such as address signals. Based on DeviceNet fieldbus technology, communication between ABB industrial robots and PLCs can be completed more quickly and conveniently.In modern industry, the communication technology between industrial robots and PLC has improved the level of production line automation and can better utilize the flexible and expandable characteristics of industrial robots. Therefore, it is foreseeable that the application of communication technology in the production line will continue to increase, thus exerting a great influence on industrial production. greater effect.
5441-689 WOODWARD generator set speed control board
8444-1074 WOODWARD Speed Sensor Full Series
5462-524 WOODWARD 2301A Speed Control Controller
8440-2174 WOODWARD Speed Sensor Full Series
8440-1706 From Woodward, USA
5462-756 Controller debugger generator WOODWARD
5466-352 WOODWARD generator set speed control board
8280-415 WOODWARD 2301A Speed Control Controller
5462-519 Generator Parts Speed Controller 2301A Speed
9907-167 WOODWARD generator set speed control board
5464-218 From Woodward, USA
5417-027 WOODWARD Speed Sensor Full Series
5463-887 Generator Parts Speed Controller 2301A Speed
5434-334 Generator Parts Speed Controller 2301A Speed
5462-531 WOODWARD 2301A Speed Control Controller
5463-393 From Woodward, USA
5417-028 WOODWARD generator set speed control board
8580-086 WOODWARD 2301A Speed Control Controller
A8516-040 Generator Parts Speed Controller 2301A Speed
E8516-051 Generator Parts Speed Controller 2301A Speed
5415-966 WOODWARD 2301A Speed Control Controller
5500-562 WOODWARD Speed Sensor Full Series
5464-458 WOODWARD generator set speed control board
5466-425 Generator Parts Speed Controller 2301A Speed
8440-1019 WOODWARD Speed Sensor Full Series
8273-1011 Controller debugger generator WOODWARD
5464-021 WOODWARD generator set speed control board
9904-206 From Woodward, USA
8580-071 WOODWARD 2301A Speed Control Controller
9905-973 WOODWARD 2301A Speed Control Controller
5461-640 WOODWARD 2301A Speed Control Controller
8200-1301 WOODWARD 2301A Speed Control Controller
