Description
1C31113G03 Emerson Ovation HART Analog Output Module
thereby controlling external devices or circuits.
Requirements for servo feed system
1. Wide speed range
2. High positioning accuracy
3. Having sufficient transmission rigidity and high speed stability
4. Quick response, no overshoot
In order to ensure productivity and processing quality, in addition to high positioning accuracy, it is also required to have good fast response characteristics, that is, the response of tracking command signals should be fast, because the CNC system requires sufficient acceleration and deceleration during startup and braking, shortening the transition process time of the feeding system and reducing contour transition errors.
5. Low speed high torque, strong overload capacity
Generally speaking, servo drives have an overload capacity of 1.5 times or more within minutes or even half an hour, and can be overloaded by 4 to 6 times in a short period of time without damage.
6. High reliability
The feed drive system of CNC machine tools is required to have high reliability, good working stability, strong environmental adaptability to temperature, humidity, vibration, and strong anti-interference ability.
Requirements for motors
1. The motor can operate smoothly from the lowest speed to the highest speed, with minimal torque fluctuations, especially at low speeds such as 0.1r/min or lower, where there is still a smooth speed without crawling phenomenon.
2. The motor should have a large and long-lasting overload capacity to meet the requirements of low-speed and high torque. Generally, DC servo motors require an overload of 4-6 times within a few minutes without damage.
3. In order to meet the requirements of rapid response, the motor should have a small moment of inertia and a large locked rotor torque, and have the smallest possible time constant and starting voltage.
4. The motor should be able to withstand frequent starting, braking, and reversing.
responsible for processing signals from on-site sensors or driving actuator actions. For example, they may need to cooperate with devices such
as BANNER travel switch T30UIPB to receive their transmitted position signals; Or by controlling components such as Burkert solenoid valve 00131421, the on/off of fluid media can be precisely managed.
these modules integrate more complex logic processing capabilities. The core task of a pressure switch is to detect whether the pressure
has reached a preset threshold and output a switch signal. Its function is highly specific and fixed. And modules 1C31113G03 and 1
C31219G01 have the ability to comprehensively judge multiple such switch signals and transmitter signals (such as transmitter 1066-P-HT-60),
and output complex control instructions according to internal logic.
