MS2-440-57MPI-1-10 EATON Touch Panel

MS2-440-57MPI-1-10 EATON Touch Panel

Brand: EATON

model: MS2-440-57MPI-1-10
The main features of a touch screen include:

Easy to operate: Users can directly operate on the screen without using a keyboard or mouse.

Intuitive: Through a graphical interface, users can intuitively understand the operation content and results.

Multifunctional: Touchscreens can integrate multiple functions such as display, input, control, etc., making devices more compact and efficient.

Aesthetics: The appearance of the touch screen is beautiful and can enhance the overall image of the device.

Get a Quote
Categories: , Tags: Brand:
  • Email:sauldcsplc@outlook.com
  • Phone:+86 18350224834
  • WhatsApp:+8618350224834

Description

MS2-440-57MPI-1-10 EATON Touch Panel

MS2-440-57MPI-1-10 Product Introduction
  • 32-bit DSP digital control mode
  • Low vibration, low noise, low power consumption
  • Maximum output current 3A/phase
  • Adopting CAN bus and supporting standard CANopen communication protocol, it can load up to 127 devices
  • Supports three modes: protocol position control, speed control, and periodic position control
  • Current setting, subdivision, motor start stop control, and real-time monitoring of motor operation can be achieved through the bus
  • 2-channel optoelectronic isolation programmable input interface
MS2-440-57MPI-1-10 has a small size, high cost-effectiveness, convenient networking, and simple wiring. It can be widely used in industries such as textile machinery, laser processing machinery,
medical equipment, various types of robots, robotic arms, automated production lines, and various CNC machine tools.
The MS2-440-57MPI-1-10 series servo drive is a universal servo drive.
Can be used in conjunction with various PLCs, CNCs, motion controllers, and computer boards,
Or it can be combined with XVS-440-10MPI-1-1U series drivers to form a multi axis control system through the DBUS bus.
It has the characteristics of high positioning accuracy, fast response, high reliability, and simple use.
Product features:
The servo motor encoder can be selected with 20BIT, 17BIT resolution, and comes standard with 2500 wires.
The pulse input frequency can reach 4MPPS. The speed frequency should reach 1200Hz. Overload can reach three times.
Customized parameter factory settings enable the servo system to be “plug and play”.
Enhanced vibration suppression function improves the system”s responsiveness.
Inertia automatic identification, after identification, most of the parameter settings can reach the optimal state.
Built in 24V power supply, built-in 1.2K resistor, no series resistor for upper computer position command, more convenient for on-site application.

Contact Us
 
Mobile phone: 18350224834
 
E-mail： sauldcsplc@outlook.com
 
WhatsApp：+86 18350224834

Implementation of communication between ABC industrial robot and PLC based on DeviceNet fieldbus technologyintroductionIn modern production systems, industrial robots and PLCs need to communicate and collaborate to complete production tasks. That is, the industrial robots output signals to the PLC, allowing the PLC to control related equipment to drive the robot”s front-end tools. This article mainly analyzes the communication problems between ABB industrial robots and PLC based on DeviceNet fieldbus technology. DeviceNet is a common network communication method in the field of automation. ABB industrial robots establish a network to communicate with Siemens PLC based on the DeviceNet network.1Configure DSQC652There are mainly 5 types of standard I/0 boards commonly used in ABB industrial robots [2]. Except for the different addresses assigned to them during setup, their configuration methods are basically the same. This article mainly analyzes the ABB standard I/0 board DS0C652, which mainly builds communication modules based on the DeviceNet network. The DS0C652 board has a distributed I/O module with 16 digital input and 16 digital output interfaces. The board is installed in the ABB industrial robot control cabinet. First, define the specific operation steps of the DS0C652 board, enter the teach pendant control panel, then enter the configuration menu (Figure 1), select the DeviceNetDevice menu, and add a template to enter Figure 2. ABB standard I/0 board is hung on the DeviceNet network, so the address of the module in the network must be set. The jumpers 6 to 12 of terminal x5 are used to determine the address of the module. The available address range is 10 to 63. Modify the parameters in the template parameters to complete the DS0C652 board settings. Click the drop-down menu to select the “Use value from template” row, select “DS0C65224VDCI/0Device”, and then the parameters that need to be set include the address of the I/0 board in the bus.Figure 1 Configuring DSQC6522Configure signals and parametersAfter completing the DS0C652 board setting, the I/0 signal setting will be performed. Setting the I/0 signal is the basis for establishing communication with the PLC. The PLC communicates and transmits data with the ABB industrial robot through the I/0 signal and the DS0C652 board. As shown in Figure 3, in the signal configuration interface, there are many default I/0 points after the system is established. Modification is not allowed. Click “Add” to add signals. When setting input and output signals, their address range is 0~15. First, enter the signal menu in the configuration options to set the input and output types, and modify the corresponding parameters. After completing the settings, the computer prompts that you need to restart the settings. If there are multiple signals that need to be defined and the waiting time is long after restarting multiple times, you can click “Cancel” and wait for all signals to be defined before clicking the “Yes” button to restart. After the signal settings are completed, click to select “Input and Output” in the ABB menu to check whether all signals have been set.Figure 2 Configure DSQC652 parametersFigure 3 Signal parameter settingsDuring the signal establishment process, attention should be paid to the DSoC652 port and PLC port addresses used, and the corresponding address table should be established, as shown in Table 1. The robot interacts with the PLC through I/O signals. During the setting process, there must be no errors in the port and address number of the PLC connected to the DSoC652. If the address is set incorrectly, the communication between the robot and the PLC will not work properly.The entire robot teaching pendant setting process is shown in Figure 4.

MC2-440-12TSB-1-1K Capacitive touch screen and resistive touch screen
XP-503-15-A10-A00-1B Intelligent operation control system
XVC-601-GTI-10DPM-V1-000 Capacitive touch screen and resistive touch screen
MC2-440-10TVB-1-1F EATON Touch Panel
XVC-601-GTI-10DPM-V1-000 EATON HMI Human Machine Interface
XCC-601-DVI-DPM-V1-000 Eaton human-machine touch screen
XV-252-57MPN-1-1AH Intelligent operation control system
XVS-460-57MPI-1-1EVAR10 Intelligent operation control system
STARTERKITECOSYSTEMCAN EATON Touch Panel
XV-102-B8-35MQR-10-PLC EATON HMI Human Machine Interface
XV-432-57CQB-1-10-PLC Human Machine Interaction
XV-102-D8-57TVR-10 EATON HMI Human Machine Interface
STARTERKITXV-200COLORHMICAN Eaton human-machine touch screen
MC2-440-10TVB-1-50 Intelligent operation control system
XV-303-10-C00-A00-1B Human Machine Interaction
XV-102-B6-35MQR-10-PLC EATON HMI Human Machine Interface
XN-16DO-24VDC-0.5A-P Human Machine Interaction
XV-152-D6-57TVR-10 Human Machine Interaction
XV-152-D6-84TVRC-10 Intelligent operation control system
XN-2DO-24VDC-2A-P Eaton human-machine touch screen
MC2-442-57CQB-1-30 EATON Touch Panel
XVC-601-GTI-10-V1-010 Human Machine Interaction
XN-KO/12 EATON HMI Human Machine Interface
MC2-430-10TVB-1-11 Intelligent operation control system
XN-GW-DNET Intelligent operation control system
XV-102-D6-57TVRC-1K EATON HMI Human Machine Interface
XN-32DI-24VDC-P EATON Touch Panel
MC2-440-10TVB-1-2L Capacitive touch screen and resistive touch screen
XV-430-12TSB-1-10-PLC Human Machine Interaction
5485KPMPP5000 EATON Touch Panel
XP-702-C0-84TSI-10 Capacitive touch screen and resistive touch screen
XN-ANBZ-SW Intelligent operation control system
XT-SUB-D-SUB-D Human Machine Interaction
XVS-450-57MPI-1-10 Capacitive touch screen and resistive touch screen
MC2-442-57CQB-1-2G Human Machine Interaction
XT-232-PT-5-01 EATON HMI Human Machine Interface

Related products