Description
IS200HFPRG1A Product Introduction
The specific application scope of the product
will depend on the needs of system integration and industrial application, but generally speaking, this type of embedded controller module can be applied to the following categories:
manufacturing processes, etc.
monitoring and control system.
of the controller module, as well as the specific needs of the customer.
designed to manage gas or steam turbines.
It has a CIMPLICITY graphical interface and an HMI with software suitable for running heavy-duty turbines.
be installed at the bottom of the cabinet. For a small setup that is easy to serve a triple redundant system, up to three components can be installed side by side.
he board can operate within a temperature range of 0 to 65 degrees Celsius without the need for a fan for cooling. NFPA Class 1. This board can be used for two applications.
user experience Secondly, if power system engineers are to consider the convenience and speed of using the product in the future, operability needs to be improved while ensuring stability. This requires a simple self-service system and an operation interface with good visual effects that can meet the needs of users. Some operating habits and other aspects * cut costs Furthermore, since there are many nodes in the power system, the same product needs to be deployed on many nodes. Then when the quantity of required products increases, cost issues will inevitably be involved. How to solve the research and development, construction and installation of products and better reduce operating expenses is also a major issue that ABB needs to consider.Implementation of communication between Omron vision system and ABB industrial robotintroductionIn modern production processes, vision systems are often used to measure and identify products, and then the results are transmitted to industrial robots for work through communications . In this process, communication settings are very important. This article analyzes the communication implementation process between the Omron FH-L550 vision system and ABB industrial robots. The main task is to enable the vision system to provide data detection results for ABB industrial robots, and the industrial robots perform related operations based on the data results. This article mainly discusses the entire process of visual system communication transmission implementation.1Ethernet-based communication settings in vision softwareThe main communication methods of Omron FH-L550 vision system controller are as follows [2], namely: parallel communication, PLCLINK communication, Ethernet communication, EtherCAT communication, and protocol-free communication. These five communication methods have their own characteristics in the communication process. In modern equipment, Ethernet communication (Ethernet communication) is the most common, so this article uses the Ethernet communication method as an example to analyze and explain.First, select the “Tools” option in the main interface, select the “System Settings” menu (Figure 1), after entering the “System Settings” menu, click the “Startup Settings” option, and select the “Communication Module” tab (Figure 2 ), after completing the above settings, return to the main interface to save the settings (Figure 3). Finally, select the function menu to perform system restart settings, and wait for the system to complete the restart before proceeding to the next step.After the system restarts, click the “System Settings” menu again and select the “Ethernet (No Protocol (UDP))” option (Figure 4). In this option, there will be parameter settings such as IP address and port. What needs to be noted here are the two IP address parameters. The parameters in “Address Setting 2” need to be filled in. The information that needs to be filled in includes the IP address of the vision controller, subnet mask, default gateway and DNS server.In the port number setting of “Input/Output Settings” at the bottom of the menu, set the port number for data input with the sensor controller. Note that the port number should be the same as the host side, and finally complete the settings and corresponding data saving work.2ABB industrial robot communication settingsFirst, configure the WAN port IP address for the ABB industrial robot. Select the control panel in the teach pendant, then select configuration, then select communication in the theme, click IPSetting, set the IP information and click “Change” to save the IP information.Next, use the SocketCreate robot command to create a new socket using the streaming protocol TCP/IP and assign it to the corresponding variable (Figure 5). Then use the SocketConnect command to connect the socket to the remote computer. After the communication connection is completed, it is necessary to send and receive information from the visual system. To send information, use the SocketSend instruction to send data instructions to the remote computer. After the vision system collects information and makes judgments, the industrial robot system will receive data from the remote computer. The data reception is completed using the SocketReceive instruction. This instruction stores the data in the corresponding string variable while receiving the data. Useful information needs to be extracted from the received data information, which requires StrPart to find the specified character position instruction, extract the data at the specified position from the string, and assign the result to a new string variable. Finally, when the socket connection is not in use, use SocketCloSe to close it.
DS200TCDAG1BDB High performance processor module GE
IS200ISBBG2AAB High performance processor module GE
DS215KLDBG1AZZ03A I/O excitation redundant module GE
IS220PSVOH1A High performance processor module GE
IS200EPSMG1A Gas turbine system Mark VI
DS200SHCAG1BAA I/O excitation redundant module GE
IS200PSCDG1A From General Electric in the United States
IS215UCVDH2AK Gas turbine system Mark VI
IS200JPDMG1ADC GE power control board
DS200TCEAG1BSF Gas turbine system Mark VI
IS200TRLYH1B GE power control board
IS200EACFG2A GE power control board
IS200VSVOH1BDC Gas turbine system Mark VI
IS200TDBSH2AAA I/O excitation redundant module GE
IS210AEAAH1BBA I/O excitation redundant module GE
IS220PRTDH1A I/O excitation redundant module GE
DS200DDTBG2A GE power control board
IS200CPFPG1A Gas turbine system Mark VI
IS220PHRAH1B GE power control board
DS200PTBAG1ADC GE power control board
DS200TCDAG1B Processor/Controller Mark VI System
IS210SCSAS1A From General Electric in the United States
IS210AEAAH1B I/O excitation redundant module GE
IS220PSFDH1AG GE power control board
IS215GFOIH1A From General Electric in the United States
IS200VRTDH1BAB I/O excitation redundant module GE
IS200TRTDH1B High performance processor module GE
IS200EMIOH1AFB Gas turbine system Mark VI
IS200ERSCG2A From General Electric in the United States
IS200JPDLG1A I/O excitation redundant module GE
IS420ESWBH2A I/O excitation redundant module GE
IS23OSTTCH2A Gas turbine system Mark VI
IS200SCTLG1A Gas turbine system Mark VI
IS200TRPGH3B GE power control board
IS200DAMCG1 High performance processor module GE
IS200ECTBG1A Gas turbine system Mark VI
IS200SCTLG1ABA GE power control board
IS200JPDFG1A From General Electric in the United States
IS200ECTBG2A Processor/Controller Mark VI System
8201-HI-IS From General Electric in the United States
IS210MACCH1A High performance processor module GE
IS230TCISH6C I/O excitation redundant module GE
IS220PTCCH1A From General Electric in the United States
IS200DSPXH1DB Gas turbine system Mark VI
IS220PAICH2B High performance processor module GE
IS200TBACIH1B From General Electric in the United States
DS200TBQCG1AAA GE power control board
DS200IMCPG1CEB Gas turbine system Mark VI
