Description
5464-024 WOODWARD 2301A Speed Control Controller
Non differential regulation is mainly used for constant speed control and is suitable for single machine operation or multiple prime movers working together in an isolated power grid. Differential regulation provides more control flexibility.
further enhancing its performance and application range.
rich additional functions, and high-precision output signals. Whether it is in the fields of generator sets, compressors, pump stations, or ships and locomotives, it can effectively ensure the stable operation of equipment within the set range.
power measurement level 1, editable screen, multi interface toolkit connection, etc. All details can be found in Woodward easyYgen manual 37582A
The rated operating temperature range of this model is -20 to 70 ° C; the rated temperature range of the LT model is -40 to 70 ° C, suitable for outdoor use.
5464-024 is equipped with a monitor (not available on the 3100 model) and is designed for front panel installation.
The built-in HMI has a color LCD and soft keys (now with dedicated buttons) for direct control of the 5464-024 device. Multi level password protection can prevent unauthorized changes.
The generator set has four operating modes and the option to configure a manual circuit breaker control device.
How to use 5464-024？
What is 5464-024 used for?
5464-024 Customs Code
In a DC brush motor, the stator is a permanent magnet and the rotor is a wound coil; the magnetism has two poles, which repel each other and attract each other. Therefore, passing direct current through the rotor coil will allow the rotor to rotate until it reaches the position where the torque is the smallest with the stator. At this time, due to the commutation of the brushes, the position where the torque was originally the smallest becomes the position where the torque is the largest. Finally, over and over again, the rotor continues to rotate. .Brushless DC does not have brushes; at the same time, in brushless DC motors, the stator is a permanent magnet and the rotor is a winding structure. In brushless DC motors, the stator is a winding and the rotor is a permanent magnet. If the winding is still on the rotor, you have to rely on physical contact to energize the winding, which does not solve the problem of brush aging. In the brushless DC motor, the winding exists in the stator and has three phase wires; when working, the input and output currents are successively supplied to the three phase wires to achieve the purpose of commutation. In brushless DC, the electromagnetic force generated by the rotor and stator is the same as that of brushed DC.For brushless DC motors, it is not necessarily whether the stator is inside or outside. A motor with a rotor outside and a stator inside is generally called an external rotor motor. The hub motor is a very special external rotor motor.Brushless DC motor, why is it classified as AC motor?This is because when we supply power to the controller of brushless DC and permanent magnet synchronous motors, we supply DC power, so it is called brushless DC; however, after the DC power is inverted through the motor controller, it communicates with the motor. For the three connected phase lines, the power supply type changes to AC. Only the changing phase voltage of AC can cause the current on the three phase lines of the motor to continuously reverse direction, so the motor is classified as an AC motor.3. Similarities and differences between brushless DC and permanent magnet synchronizationBrushless Direct Current Motor, English BLDC, English full name Brushless Direct Current MotorPermanent Magnet Synchronous Motor, English PMSM, English full name: Permanent Magnet Synchronous Motor
8440-1715 SPM-D11 WOODWARD generator set speed control board
5463-034 WOODWARD Speed Sensor Full Series
5463-034 WOODWARD 2301A Speed Control Controller
5461-892 WOODWARD 2301A Speed Control Controller
5462-523 Generator Parts Speed Controller 2301A Speed
5463-432 WOODWARD 2301A Speed Control Controller
5441-629 Generator Parts Speed Controller 2301A Speed
5464-648 WOODWARD generator set speed control board
5464-538 WOODWARD Speed Sensor Full Series
5501-471 WOODWARD Speed Sensor Full Series
5464-716A Generator Parts Speed Controller 2301A Speed
5501-376 From Woodward, USA
8238-002 From Woodward, USA
5461-640 Generator Parts Speed Controller 2301A Speed
8915-886 Generator Parts Speed Controller 2301A Speed
1680-649 From Woodward, USA
5462-533 Controller debugger generator WOODWARD
5403-978 WOODWARD generator set speed control board
5466-336 WOODWARD 2301A Speed Control Controller
5463-873 From Woodward, USA
5441-695 From Woodward, USA
5466-316 From Woodward, USA
8915-075 Controller debugger generator WOODWARD
5466-1049 Controller debugger generator WOODWARD
5466-409 WOODWARD 2301A Speed Control Controller
5415-623 Controller debugger generator WOODWARD
5463-428 WOODWARD 2301A Speed Control Controller
8915-024 WOODWARD generator set speed control board
5463-154 Generator Parts Speed Controller 2301A Speed
9905-537 WOODWARD 2301A Speed Control Controller
5463-408 Generator Parts Speed Controller 2301A Speed
