Description
- BENTLY 511342 gateway is designed with multi protocol compatibility and modularity, seamlessly connecting industrial systems,
- operating at a wide temperature range of -40 ° C to 85 ° C, supporting 8-channel rotating equipment monitoring,
- remote configuration to improve efficiency, and ensuring stable power and automation.
It can connect the Bently Nevada 3500 system with other control systems or host computers to achieve data interconnectivity.
thus achieving integration with other industrial control systems.
In a DC brush motor, the stator is a permanent magnet and the rotor is a wound coil; the magnetism has two poles, which repel each other and attract each other. Therefore, passing direct current through the rotor coil will allow the rotor to rotate until it reaches the position where the torque is the smallest with the stator. At this time, due to the commutation of the brushes, the position where the torque was originally the smallest becomes the position where the torque is the largest. Finally, over and over again, the rotor continues to rotate. .Brushless DC does not have brushes; at the same time, in brushless DC motors, the stator is a permanent magnet and the rotor is a winding structure. In brushless DC motors, the stator is a winding and the rotor is a permanent magnet. If the winding is still on the rotor, you have to rely on physical contact to energize the winding, which does not solve the problem of brush aging. In the brushless DC motor, the winding exists in the stator and has three phase wires; when working, the input and output currents are successively supplied to the three phase wires to achieve the purpose of commutation. In brushless DC, the electromagnetic force generated by the rotor and stator is the same as that of brushed DC.For brushless DC motors, it is not necessarily whether the stator is inside or outside. A motor with a rotor outside and a stator inside is generally called an external rotor motor. The hub motor is a very special external rotor motor.Brushless DC motor, why is it classified as AC motor?This is because when we supply power to the controller of brushless DC and permanent magnet synchronous motors, we supply DC power, so it is called brushless DC; however, after the DC power is inverted through the motor controller, it communicates with the motor. For the three connected phase lines, the power supply type changes to AC. Only the changing phase voltage of AC can cause the current on the three phase lines of the motor to continuously reverse direction, so the motor is classified as an AC motor.3. Similarities and differences between brushless DC and permanent magnet synchronizationBrushless Direct Current Motor, English BLDC, English full name Brushless Direct Current MotorPermanent Magnet Synchronous Motor, English PMSM, English full name: Permanent Magnet Synchronous Motor
3500/62-04-01 BENTLY series: 3500 communication gateway module
330901-00-90-50-02-00 BENTLY series: 3500 communication gateway module
1900/65A 167699-02 Mechanical vibration monitoring system
3500/62 Mechanical vibration monitoring system
330400-02-05 Bently State Monitoring Interface System
3500/93-01-00-00-00 Bently State Monitoring Interface System
3300/16-14-01-03-00-00-01 Bently State Monitoring Interface System
3500/46M Belonging to the Bently Nevada 3500 series
134652-01 Belonging to the Bently Nevada 3500 series
3500/70M 140734-09 Bently State Monitoring Interface System
3500/15 133292-01 BENTLY TSI system module
125736-01 Bently State Monitoring Interface System
3500/32М 149986-02 BENTLY series: 3500 communication gateway module
3500/62-04-00 Belonging to the Bently Nevada 3500 series
330903-03-19-10-02-00 BENTLY TSI system module
1701/10-01 BENTLY TSI system module
9200-01-05-10-00 3500 series front card and rear card
330750-80 Belonging to the Bently Nevada 3500 series
133819-01 Bently State Monitoring Interface System
3500/92-04-01-00 Mechanical vibration monitoring system
1900-65A BENTLY TSI system module
3500/05-01-02-00-01 BENTLY TSI system module
135462-01 Belonging to the Bently Nevada 3500 series
136294-01 BENTLY TSI system module
3500/42MNSFP350042M Mechanical vibration monitoring system
3500/22-01-00 Belonging to the Bently Nevada 3500 series
3500/05-02-05-00-00-01 Bently State Monitoring Interface System
330130-040-00-00 BENTLY series: 3500 communication gateway module
3500/53M Mechanical vibration monitoring system
3500/40M Bently State Monitoring Interface System
1900/65A-00-02-02-00-01 Mechanical vibration monitoring system
3500/94 Bently State Monitoring Interface System
3500/53 Mechanical vibration monitoring system
3500/15E Bently State Monitoring Interface System
128240-01 Mechanical vibration monitoring system
3500/22-01-01 Bently State Monitoring Interface System
