Description
- BENTLY 3500/45-01-00 159654-01 gateway is designed with multi protocol compatibility and modularity, seamlessly connecting industrial systems,
- operating at a wide temperature range of -40 ° C to 85 ° C, supporting 8-channel rotating equipment monitoring,
- remote configuration to improve efficiency, and ensuring stable power and automation.
It can connect the Bently Nevada 3500 system with other control systems or host computers to achieve data interconnectivity.
thus achieving integration with other industrial control systems.
Thorsten Schmidt said: “Dynamic and static current sharing are crucial for the stable operation of parallel modules. For the same power output, a system using SCALE-iFlex LT only requires five parallel modules, while other manufacturers” solutions require six The technical reason for achieving significant cost and complexity reduction is to ensure that the delay difference between the turn-on and turn-off commands between modules is less than 20ns, and the current difference between modules is less than 20A when conducting a rated current of 600A. This allows each module to Operates reliably without the need for current derating, which is essential in less advanced drive solutions.”Up to 6 EconoDUAL 3 or equivalent power modules can be connected in parallel from the same Insulated Master Control (IMC) unit, making them more compact than conventional products. The module adapted gate driver (MAG) form factor matches the EconoDUAL modules, each of which features two SCALE-2 ASICs (one per channel) to optimize parallel symmetry, increase efficiency and enhance protection.The new SCALE-iFlex LT reduces switching losses by 3% to 5% because the SCALE-2 ASIC has an integrated push stage for fast turn-on and turn-off. Power Integrations” Advanced Active Clamping (AAC) protection feature enables higher DC bus voltages. In addition, a comprehensive set of other protection features including short-circuit protection are available. The driver can provide 1700V reinforced insulation, and customers can choose whether to apply conformal paint.The SCALE-iFlex Single Gate Driver uses Power Integrations” SCALE-2™ ASIC technology, which significantly reduces component count compared to traditional products. The ASIC also provides Advanced Active Clamping (AAC) overvoltage protection during normal operation, which is a vast improvement over simple soft shutdown and adds additional protection in the event of a short circuit during turn-on.
135613-02 Mechanical vibration monitoring system
3500/32 125712-01 Belonging to the Bently Nevada 3500 series
128275-01 Belonging to the Bently Nevada 3500 series
3500/05-02-04-00-00-00 Mechanical vibration monitoring system
3500/42 176449-02 Bently State Monitoring Interface System
3500/42M 140734-02 3500 series front card and rear card
3500/22M 288055-01 Bently State Monitoring Interface System
3500/33-01-01 Mechanical vibration monitoring system
3500/92 136180-01 Bently State Monitoring Interface System
3500/50 133388-02 BENTLY series: 3500 communication gateway module
330180-51-00 BENTLY TSI system module
149992-01 Belonging to the Bently Nevada 3500 series
3500/22-01-02-00 BENTLY series: 3500 communication gateway module
3500/33-01-00 BENTLY TSI system module
125704-01 3500 series front card and rear card
106M1081-01 BENTLY series: 3500 communication gateway module
3500/61 Bently State Monitoring Interface System
3300/16-13-01-01-00-00-00 Belonging to the Bently Nevada 3500 series
1900/65A-00-02-02-00-01 Belonging to the Bently Nevada 3500 series
3500/05-02-02 3500 series front card and rear card
3500/22-01-01-00 BENTLY series: 3500 communication gateway module
330850-90-05 BENTLY TSI system module
1900/65A-00-04-01-00-00 BENTLY TSI system module
3500/33 149986-01 Bently State Monitoring Interface System
135473-01 Belonging to the Bently Nevada 3500 series
3500/05-01-02-00-01 Mechanical vibration monitoring system
135473-01 Mechanical vibration monitoring system
3500/33-01-01 BENTLY TSI system module
129478-01 BENTLY TSI system module
125840-02 BENTLY series: 3500 communication gateway module
3500/25 BENTLY series: 3500 communication gateway module
125840-02 3500 series front card and rear card
3500/15 BENTLY TSI system module
3500/50-01-00 Bently State Monitoring Interface System
3500/93-01-00-00 Mechanical vibration monitoring system
330108-91-05 3500 series front card and rear card
330901-00-40-05-02-05 3500 series front card and rear card
3500/33-01-00 Belonging to the Bently Nevada 3500 series
3500/50-01-00-01 BENTLY series: 3500 communication gateway module
125720-01 Belonging to the Bently Nevada 3500 series
3500/50 Mechanical vibration monitoring system
3500/25-01-03-00 Mechanical vibration monitoring system
