Description
1C31194G01 Emerson redundant system output module
thereby controlling external devices or circuits.
speed control
Point to point control. There are many methods to calculate a motion trajectory, usually based on a velocity curve such as a triangular velocity curve, trapezoidal velocity curve, or S-shaped velocity curve.
Electronic gear (or electronic cam). That is to say, the position of the driven shaft mechanically follows the position change of an active shaft. A simple example is that a system consists of two turntables that rotate according to a given relative angular relationship. Electronic cam is more complex than electronic gear, as it makes the following relationship curve between the driving shaft and the driven shaft a function. This curve can be non-linear, but it must be a functional relationship.
Selection of motion controller
1. Determine the type of servo motor based on the working characteristics of the equipment to be developed.
2. Determine the number of motor shafts to be controlled and the operating mode of the motor.
3. Determine the position detection and feedback mode, and choose whether to use a photoelectric encoder, grating ruler, or magnetic grating ruler.
4. Determine the number of input and output switch quantities.
5. Based on the above content, choose a suitable motion controller
responsible for processing signals from on-site sensors or driving actuator actions. For example, they may need to cooperate with devices such
as BANNER travel switch T30UIPB to receive their transmitted position signals; Or by controlling components such as Burkert solenoid valve 00131421, the on/off of fluid media can be precisely managed.
these modules integrate more complex logic processing capabilities. The core task of a pressure switch is to detect whether the pressure
has reached a preset threshold and output a switch signal. Its function is highly specific and fixed. And modules 1C31194G01 and 1
C31219G01 have the ability to comprehensively judge multiple such switch signals and transmitter signals (such as transmitter 1066-P-HT-60),
and output complex control instructions according to internal logic.
